Kollmorgen SERVOSTAR 400, Сборка и установка

Страница: 11 / 76

2.6 Nameplate
The nameplate depicted below is attached to the side of the servo amplifier.
2.7 Equipment description
2.7.1
Package as supplied
If you order a SERVOSTAR 400 series amplifier from us, you will receive:
— SERVOSTAR 4xxM (master)
— Mating connectors for X0, X1, X3, X6
— Protective cover for the axis-side (required only once per system)
— Assembly and Installation Instructions
— Setup software DRIVE.EXE and online documentation on CD-ROM
alternatively
—
SERVOSTAR 4xxA (axis module)
— Mating connector for X3, X6
— Short-form instructions
The mating SubD connectors are not part of the package supplied!
Accessories: (must be ordered separately if required)
— Electrical add-on fan (for max. 2 axes, required for SERVOSTAR 4x6)
— Synchronous servomotor (linear or rotary)
— Motor lead (pre-assembled), or motor cable as cut-off loose connectors
(motor- and amplifier-side)
— Feedback cable (pre-assembled) or both feedback connectors, loose with
feedback cable as cut-off length
— External regen resistor (
ð
p.65)
— Communication cable to PC (
ð
p.51) for parameterizing the master and any
attached axis modules
— Power cable, control cables, fieldbus cables (as lengths)
SERVO
STAR ®
400 Installation Manual 11
Kollmorgen
07/05
Technical description
Typenbezeichnung
Spannungsversorgung
Model Number
Power Supply
Ser. Nr
Nennstrom
Ser. No.
Nom. Current
Bemerkung
Schutzart
Comment
Encl.Rating
Danaher Motion GmbH
Wacholderstr. 40-42
D-40489 Düsseldorf
www.DanaherMotion.com Customer Support
Europe
Tel. +49 (0)203 / 99790
Italy 3 36 594260
North America 1 8 -3
Tel. + 9 (0) 2 /
Tel. + ( 15) 226 148
Umgebungstemp.
Ambient temp.
E217428
1VD4
LISTED
IND. CONT. EQ.
C US
UL
®
5.76
008102106842
Barcode
Serial Number
Barcode
Firmware