Kollmorgen AKD-C Скачать руководство пользователя страница 86 | Manualshive

Страница: 86 / 92

background image

AKD-C Installation | 10 Setup

10.3.4 Install and start WorkBench

WorkBench installs automatically from the DVD included with the drive. WorkBench is also
available on the Kollmorgen Web site: www.kollmorgen.com.

Once installation is complete, click the WorkBench icon to start the program. WorkBench will
show a list of all the drives that it can find connected to the AKD-C.

Select the AKD-C you wish to configure and then click

Next

.

If multiple devices are detected, a device can be uniquely identified using one of the following
methods:

1. The MAC address of the device. This address is printed on the sticker on the side of the

drive.

2. The name of the devices. The device name is set using WorkBench. A new device

defaults to “No_Name.”

3. Blinking the display. Select a device and click

Blink

to force the display on the front of the

drive to blink on and off for 20 seconds.

10.3.5 Enable the drive using the setup wizard

Once a connection to the AKD-C has been established, all AKD-N connected to this device
are listed. Select one of these drives and the AKD Overview screen appears. Your drive
appears in the navigation area on the left of the screen. Right click on your drive name and
select

Setup Wizard

from the drop-down menu. The Setup Wizard guides you through the ini-

tial drive configuration, which includes a simple test motion.

After completing the Setup Wizard, your drive should be enabled. If the drive is not enabled,
check the following:

1. The hardware enable (HW) for the drive strings must be in the enabled state (pin 3 on

AKD-C X15 connector).

2. The software enable (SW) must be in the enabled state. Activate using the

Enable/Dis-

able

button on the upper toolbar on WorkBench or in the Overview screen.

3. No faults may be present (click the

Clear Fault

button on the upper tool bar to clear any

faults).

The status of HW enable, SW enable, and Faults is displayed in the lower toolbar of the
WorkBench software. The drive is connected if the lower right corner shows

Online

.

You can now use the Settings View in WorkBench to complete advanced configuration of
your drive.

86

Kollmorgen | kdn.kollmorgen.com | February 2018

«
...
84
85
86
87
88
...
»

Содержание AKD-C





























































































Отзывы:

Нет отзывов

Похожие инструкции для AKD-C

Бренд: Fein Страницы: 70

KH 3163 POWER SCRAPER

Бренд: Parkside Страницы: 28

Бренд: BK Precision Страницы: 25

WOOD MILL G9959

Бренд: Grizzly Страницы: 52

Бренд: HORN'UP Страницы: 20

Бренд: RASOR Страницы: 15

Бренд: jbc Страницы: 16

Бренд: VOLTCRAFT Страницы: 4

Бренд: Kilews Страницы: 14

Бренд: Sima Страницы: 15

Бренд: SFORZATO Страницы: 9

SMART ERASER SA695

Бренд: Sealey Страницы: 4

Бренд: Pyramid Страницы: 3

Бренд: Neilsen Страницы: 4

Бренд: Elektro-Automatik Страницы: 28

Autronic ACR Series

Бренд: Forte Страницы: 2

Бренд: Renkforce Страницы: 6

ServoPress 605-660

Бренд: Schmidt Страницы: 30

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды