Kohler COMMAND CH18, Руководство по обслуживанию

Страница: 153 / 232

8.29
Section 8
Electrical System and Components
8
Figure 8-42. Style ‘‘B’’ Commutator End Cap with
Brushes.
6. Install the thru bolts and tighten securely.
7. Lubricate the drive shaft with Kohler bendix
starter drive lubricant (see Section 2). Install the
drive components following the instructions for
servicing the starter drive.
Solenoid Shift Electric Starters
The following subsection covers the solenoid shift
electric starters. Much of the information in the
proceeding subsection relates to this type starter also,
so it is not repeated here. A Nippondenso or Delco-
Remy solenoid shift starter may be used. The
Nippondenso starter is covered first, and the Delco-
Remy starter servicing follows.
Operation – Solenoid Shift Starter
When power is applied to the starter the electric
solenoid moves the drive pinion out onto the drive
shaft and into mesh with the flywheel ring gear.
When the pinion reaches the end of the drive shaft it
rotates the flywheel and cranks the engine.
When the engine starts and the start switch is released
the starter solenoid is deactivated, the drive lever
moves back, and the drive pinion moves out of mesh
with the ring gear into the retracted position.
Starter Assembly
Armature
Nut
Drive
Lever
Dust
Cover
Solenoid
Nut
Drive
Pinion
Drive
End Cap
Frame
Wire
Brushes
Brush
Holder
Brush Spring
Insulator
Commutator
End Cap
Thru Bolt
Front Stop
Collar
Retainer
Rear Stop
Collar
Figure 8-43. Nippondenso Solenoid Shift Starter.