Kohler Aegis LH685, Руководство по обслуживанию

Страница: 108 / 172

9.2
Section 9
Disassembly
Shut Off Fuel Supply
Remove Muffler
1. Remove the exhaust system, muffler, and
attaching hardware from the engine.
Remove Starter and Adapter Plate
1. Disconnect the leads attached to the starter
solenoid terminals.
2. Remove the two hex. flange screws securing the
starter to the adapter plate. See Figure 9-2.
Figure 9-2. Removing Starter Assembly.
3. Remove the two hex. flange screws attaching the
adapter to the crankcase. Note the orientation of
the cutout. The upper screw may also secure a
clamp for the stator leads.
Figure 9-3. Removing the Adapter Plate Screws.
Drain Coolant from Cooling System
1. Loosen the radiator cap, then loosen the radiator
drain plug and allow the system to drain. Use
a suitable container to catch the coolant. See
Figure 9-4.
Figure 9-4. Radiator Drain Plug.
2. Remove the coolant drain plugs on each side of
block. Allow any remaining coolant to drain out.
See Figure 9-5. Dispose of the coolant properly,
according to local regulations.
Figure 9-5. Removing Coolant Drain Plugs in Block.
Radiator Drain Plug
Not For Resale
www.SmallEngineDiscount.com