Koden MDC-7000P series, Руководство по установке

Страница: 85 / 152

MDC-7000P/7900P Series Chapter 4 Setup after installation
0092669006-05E 4-29
4.6.2 External save of setup data (Cannot be performed while transmitting)
To save setup data externally, this information can be later used to restore after a possible malfunction.
The external memory uses an SD memory card.
CAUTION: Please do not use the SD memory card which is loaded with software program files.
Save setup data to SD card:
(1) Insert SD memory card in the upper card reader on the rear of the Display unit.
(2) Press MENU key to display “Menu”.
Select [MAINTENANCE] => [BACKUP] => [SD CARD] => [SETUP SAVE] => [GO], and press
ENT key.
When SD memory card not inserted, [SD CARD] menu is grayed out and cannot be operated.
Restore setup data from SD card:
(1) Insert SD card that was used to store settings in above procedure in the upper card reader on the
rear of the Display unit.
(2) Press MENU key to display “Menu”.
Select [MAINTENANCE] => [BACKUP] => [SD CARD] => [SETUP LOAD] => [GO], and press
ENT key.
When SD memory card not inserted or no data found on the card, [SD CARD] menu is grayed out
and cannot be operated.
4.6.3 Parameter reset
Use this function as means to return the radar to its default settings as it was at first power on.
(1) Press MENU key to display “Menu”.
Select [MAINTENANCE] => [BACKUP] => [PARAMETER RESET] => [GO] => and press ENT
key.
4.7 TOTAL Hour and TX Hour (Cannot use while transmitting)
TOTAL HOUR menu indicates the total operating time of the radar.
Following operation can be used to reset total hours to 0.
(1) Press MENU key to display “Menu”.
Select [MAINTENANCE] => [TOTAL HOUR] => [RESET] => and press ENT key.