Koden MDC-7000P series, Руководство по установке

Страница: 75 / 152

MDC-7000P/7900P Series Chapter 4 Setup after installation
0092669006-05E 4-19
4.3.8 Changing formats of input/output ports of navigation devices, position
and ship speed (IEC 61162).
When the data is correctly input in each port and is not displayed on the display, the formats of signals
(IEC 61162) may be unmatched. In this case, display [INPUT] menu mentioned in 4.3.7, and confirm
that a mark is displayed at the intersection point of the input sentence and the input port. When a mark
is not displayed, set each format (baud rate) of input/output so as to match with those of connected
sensors with input sentences.
The baud rates are:
IEC 61162-1: 4800 bps
IEC 61162-2: 38400 bps
Default value per port is set as follows:
NAV: IEC 61162-2
EPFS: IEC 61162-1
SDME: IEC 61162-1
GYRO: IEC 61162-2
OTHER: IEC61162-1
GYRO and OTHER port will be displayed when JB-35 is connected to J3.
Example of change of setting: NAV port IEC61162-2 => IEC61162-1
Press MENU key to display “Menu”.
Select [MAINTENANCE] => [I/O] => [FORMAT] => [NAV] => [61162-1], and press ENT key.
[AUTO SETUP] mode can set format of all I/O ports automatically.
Press MENU key to display “Menu”.
Select [MAINTENANCE] => [I/O] => [FORMAT] => [AUTO SETUP] => [GO], and press ENT key.
About 30 sec. later all I/O ports can be set by input signals connected to external devices.