Koden MDC-7000P series, Руководство по установке

Страница: 46 / 152

Chapter 3 Installation Method MDC-7000P/7900P Series
3-24 0092669006-05E
3.3.2.1 Flush mounting the Operation unit
Preparation:
(1) Cut an opening as shown in Figure 3.11 in desired location on a panel.
(2) Mark position of mounting holes.
(4mm screw for 4holes)
(15/32)
12
(5 3/64)
128
(4 5/64)
122
(15/32)
12 (12 33/64) 318
(15/32)
12
(13 15/32)
342
(3 55/64)
98
(13 45/64)
348
Unit : mm(inch)
Installation:
(1) Remove corner guard caps of Operation unit.
(2) Insert the Operation unit and its connecting cable into the opening and adjust the Operation
unit parallel to the mounting face (Figure 3.12).
(3) Secure the Operation unit to the panel with 4 mm tapping screw (4 places).
(4) Reinstall corner guard caps removed in (1) to the original places.
Figure 3.11 Cutout Daigram for Operation unit
(4 51
/64
)
Figure 3.12 Flush Mounting of the Operation unit
Note: Panel thickness: 10 mm (max)
Corner guard cap
(4 places)
M4 screw
(4 places)
Operation unit