Koden MDC-5200 SERIES, Руководство по эксплуатации

Страница: 94 / 182

Chapter 3 Alarm MDC-5200/5500 Series
0093155002-00 3-10
6
When move operation is completed, press MENU key, numerical marks on the display will
disappear, and nav line cross alarm will be activated.
How to add
There are two methods to add nav line cross alarm position.
First method is to use cursor, second is to input latitude/longitude by the menu.
Example: cursor method
1
Press MENU key to display “Menu”.
Select [ALARM] => [NAV LINE CROSS] => [ADD] => [CURSOR] => select [1 to 10] => [GO], and
press ENT key.
2
Move cursor to the nav line cross mark before which you want to add new mark, then change color
or delete position data.
3
Press ACQ key, medium circle mark will appear on the selected mark position, and numerical data
information is displayed in the “NAV LINE INFO” window at lower on the display.
4
Move cursor to new additional position, then press ENT key. New position point will be inserted on
the display.
Selected latitude and longitude position data can be changed directly using cursor and ENT key
via “NAV LINE INFO” window. Line color can be changed directly using cursor via “NAV LINE
INFO” window. If you want to delete selected data, move cursor to word “DELETE”, then press
ENT key.
5
Repeat operation of clause 2 to 4 mentioned previously.
6
When add operation is completed, press MENU key, numerical marks on the display will
disappear, and nav line cross alarm will be activated.
x-1
x-2
x-1
x-2
x-1
x-2
x-1
x-2
x-1
x-2
x-3
x: Block number
(1 to 10)
Cursor
Press
ACQ key
New position
Press
ENT key