Koden MDC-5200 SERIES, Руководство по эксплуатации

Страница: 122 / 182

Chapter 6 Map operation MDC-5200/5500 Series
0093155002-00 6-4
4
Move cursor to third input position, then press ENT key. No.3 mark is displayed, and a line is
generated from No.2 to No.3.
You can input up to 100 point. When input is completed, press MENU key. Mark number will
disappear.
5
Refer to 3.4 Nav line cross “How to edit” for the procedures to make plural divided coast line in the
memory of same block number.
(2) BLOCK NUMBER OPERATION
1
Press MENU key to display “Menu”.
Select [MAP] => [COAST LINE] => [EDIT] => [BLOCK NUMBER] => [select number 1 to 10] =>
Following input menu is displayed.
2
Select [LAT] => Latitude data set screen is displayed.
Set LAT data with up, down, right and left roll action of trackball/joystick, and press ENT key.
3
Select [LON] => Longitude data set screen is displayed.
Set LON data with up, down, right and left roll action of trackball/joystick, and press ENT key.
4
Select [COLOR] => Eight colors box is displayed.
Select color with up and down roll action of trackball/joystick, and press ENT key.
5
Select [DIVIDE] => [ON] or [OFF], and press ENT key.
[DIVIDE] => [ON] means that it is not connected coast line to the next number data.
6
Select [SET], and press ENT key to save input data.
NUMBER 1
LAT 0 ˚ 00.000N
LON 0 ˚ 00.000E
COLOR
DIVIDE OFF
SET
0 ˚ 00.000N
0 ˚ 00.000N
90 ˚ 00.000S-
90 ˚ 00.000N
x: Block number
(1 to 10)
Press
MENU key
x-3
x-1
x-2
1-
1-2
1-3
DIVIDE
ON
1-4
1-5 1-6
1-1