Koden MDC-5200 SERIES, Руководство по эксплуатации

Страница: 93 / 182

MDC-5200/5500 Series Chapter 3 Alarm
0093155002-00 3-9
5
The procedures to input plural divided nav line in the memory of same block number are as follows.
(Example)
After input the one nav line (from x-1 to x-3), please input the start point of the new nav line (x-4).
Press OFF key to divide the start point (x-4) from the last point (x-3).
Repeat operation of clause 3 and 4 mentioned previously (x-5, x-6).
How to move nav line
There are two methods to move nav line cross alarm.
First method is to use cursor, second is to input latitude/longitude by the menu.
Example: cursor method
1 Press MENU key to display “Menu”.
Select [ALARM] => [NAV LINE CROSS] => [MOVE] => [CURSOR] => select [1 to 10] => [GO],
and press ENT key.
2
Move cursor to the nav line cross mark which you want to move to new positon, then change color
or delete position data.
3 Press ACQ key, medium circle mark will appear on the selected mark position, and numerical data
information will be displayed in the “NAV LINE INFO” window at lower on the display.
4
Move cursor to new position, then press ENT key. Selected mark positon will move to new
positon.
Latitude and longitude position data can be changed directly by using cursor and ENT key by “NAV
LINE INFO” window. Line color can be changed directly by using cursor by “NAV LINE INFO”
window. If you want to delete selected data, move cursor to word “DELETE”, then press ENT key.
5
Repeat operation of clause 2 to 4 mentioned previously.
x: Block number
(1 to 10)
Cursor
Press
ACQ key
x-1 x-2
x-3
x-1
x-2
x-3
x-1
x-2
x-3
x-1
x-2
x-3
Press
ENT key
New position
x: Block number
(1 to 10)