Koden MDC-5200 SERIES, Руководство по эксплуатации

Страница: 101 / 182

MDC-5200/5500 Series Chapter 4 Target (AIS and TT)
0093155002-00 4-5
ASSOCIATION
When an AIS target and a tracked target of TT (ARPA) are the same target, it is automatically
associated to a single target.
Select priority of the association with either AIS or TT (ARPA).
If the low-speed ship is associated and displayed with TT priority, then HDG may be unstable. So, the
display with AIS priority is recommendable.
1
Press MENU key to display “Menu”.
Select [TARGET] => [ASSOCIATION] => [ASSOCIATION], and press ENT key after selecting the
setup value.
OFF: Association is turned off.
TT: Symbols of both TT (ARPA) and AIS are associated to TT (ARPA). However when the target of
AIS is sleeping target it is not associated.
AIS: Symbols of both TT (ARPA) and AIS are associated to AIS. However when the target of
AIS is sleeping target it is not associated.
In addition, [CHG SELECTED TGT] and [SETTING] are provided.
[ASSOCIATION] changes priority of the association of all targets while [CHG SELECTED TGT]
changes priority of the association for selected target only.
[SETTING] designates conditional items of association among RNG, CRS, SPD, SPD LIM, TIME
REPRIEVE and RATIO.
RNG: It designates the range to determine association. (0.001NM to 1.000NM)
CRS: It designates the course to determine association. (10.0
°
to 60.0
°
)
SPD: It designates the speed difference to determine association. (1.0kn to 20.0kn)
SPD LIM: It designates the minimum speed to determine association. (1.0kn to 10.0kn)
TIME REPRIEVE: It designates the time to determine association. (1sec to 99sec)
RATIO: It designates the ratio to determine association. (0 to 100)
ECHO PAST POSN TIME
TRAIL VECT
DISPLAY CPA/TCPA
ALARM CPA
TARGET
⇒
TCPA ASSOCIATION
OFF/TT/AIS
NAV TOOL ANCH
⇒
CHG SELECTED TGT
MAP AIS ID DISP TYPE SETTING
RNG/CRS/SPD/SPD LIM
BRILL TT ID DISP TYPE
/TIME REPRIVE/RATIO
SYSTEM ID DISP SIZE
MAINTENANCE INPUT RNG
LOST ALARM
ASSOCIATION
AUTO ACQ AREA