Koden MDC-5200 SERIES, Руководство по эксплуатации

Страница: 120 / 182

Chapter 6 Map operation MDC-5200/5500 Series
0093155002-00 6-2
How to Clear OWN SHIP PAST TRACK
1 Press MENU key to display “Menu”.
Select [MAP] => [OWN TRACK] => [CLEAR] => [GO], and press ENT key.
All OWN SHIP PAST TRACK disappears, recording and display will restart.
6.3 Target track past position display
This is to set up TT past track position display, display ON or OFF, clear operation, color setting, select
track style, plot interval and maximum plot numbers.
1
Press MENU key to display “Menu”.
Select [MAP] => [TARGET TRACK] =>
2
Select [TARGET TRACK] => move trackball/joystick to right, select [1 to 100], and press ENT key.
3
Select [DISPLAY] => [ON], and press ENT key.
4
Select [CLEAR] => [GO], and press ENT key.
The past track of chosen TT will be deleted.
5
Select [COLOR] => select color from eight colors => press ENT key.
TT past track will turn selected color.
6
Select [STYLE] => select style* => press ENT key.
7 Select [PLOT INT] => and press ENT key after selecting the set up value.
Selection values: OFF, 2sec, 15sec, 30sec, 1min, 3min, 5min
8
Select [PLOT NUMBER] => and press ENT key after selecting the set up value.
Selection values: 50, 100, 200, 500, 1000
Target track start
1
Move cursor to an AIS target or TT (ARPA) target to display track, keep ENT key pressed, and
then press ACQ key.
Target track finish
1
Move cursor to an AIS target or TT (ARPA) target to track off, and then press OFF key.
*Line style: