Koden MDC-5200 SERIES, Руководство по эксплуатации

Страница: 106 / 182

Chapter 4 Target (AIS and TT) MDC-5200/5500 Series
0093155002-00 4-10
AIS filter
When there are many AIS targets, the display may become unclear. In that case, by setting AIS FILTER,
it is possible to hide unnecessary sleeping targets or to display the necessary targets only, and the
clear view of the target can be achieved.
Note: The filter is absolutely used to limit display. When input is to be limited, [INPUT RNG] shall be
operated.
1
Press MENU key to display “Menu”.
Select [TARGET] => [AIS] => [AIS FILTER], and press ENT key after selecting the setup value.
Selection values:
CLASS A: OFF, ON
CLASS B: OFF, ON
RNG: 0.0 to 64.0NM
SPD: 0.0 to 100.0kn
CPA/TCPA: OFF, ON
MOORED: OFF, ON
AT ANCHOR: OFF, ON
AGROUND: OFF, ON
NUC: OFF, ON
GUARD ZONE: OFF, ON Exclude from RNG filter.
ECHO ALARM: OFF, ON Exclude from RNG filter.
AtoN ON/OFF
AtoN (Aids to Navigation) is included in the received AIS information.
Select [ON] (display of AtoN) or [OFF] (no display of AtoN).
1
Press MENU key to display “Menu”.
Select [TARGET] => [AIS] => [ATON] => select [OFF] or [ON], and press ENT key.