Koden CVR-010, Руководство по эксплуатации, Страница: 80 / 114

CVR–010
Outputting Stored Data for PC–Based Applications
70
10.3. Outputting Stored Data
(continued – 2/2)
10.3.3. Uploading Stored Data
・
After choosing the desired output interval via the preceding procedure, activate the data
uploading function in the following manner:
Figure 10-4 Uploading Stored Data – Step (1)
(1) Select “ 3:OUTPUT STORED DATA ” by pressing

.
- The equipment is now ready to start uploading
data.
- The key symbol
[ ENT]
in the “ PRESS [ENT ]
TO START ” message below the menu should
start blinking highlighted, prompting you to
press

to execute the function.
(2) Press

to start the data uploading process.
- A 4–to–5 digit down counter
* 1
should then show up in the middle between the menu
and two message lines, as in the example in the figure below.
- The counter reading becomes 0 upon completion of uploading, when the counter will
be turned off.
Figure 10-5 Uploading Stored Data – Step (2)
(3) To terminate the uploading before it
completes, press

.
(4) Press

to exit the SYSTEM MENU
mode, returning to the normal echo
sounder screen.
*
1
:
The number of counter digits represents the number of output data sentence blocks terminated by carriage return
(CR) and line feed (LF) codes, and its approximate maximum value varies with the output interval selected, as follows:
43,200 (2 secs), 14,400 (6 secs), 8,640 (10 secs), 4,320 (20 secs), 1,440 (60 secs)
SYSTEM MENU
1:BACKGROUND
2:SYSTEM CHECK
3:OUTPUT STORED DATA i
4:OUTPUT INTERVAL
5:LANGUAGE
6:BAM PROTOCOL
7:AUTO TVG RESPONSE
PRESS i [MENU] TO PREVIOUS MENU
PRESS i [ENT] i TO START
Blinking
PRESS i [MENU] TO PREVIOUS MENU
PRESS i [CLR] i TO BREAK
43097
Down counter (example)