Koden CVR-010, Руководство по эксплуатации

Страница: 64 / 114

CVR–010
Advanced Settings
54
8.10.3. Selecting Depth Readout Units
・
The on–screen depth readout is initially in meters ( m ) .
・
You can read depth in fathoms (
FM )
or feet (
FT )
via the steps described below.
・
However, depth information to be stored in memory for later off–line retrieval will be in
meters regardless of the readout unit selected.
・
See paragraph 10.1 for details.
< C A U T I O N >
In order to operate the equipment in compliance with IMO Resolution MSC.(69)74
Annex 4, the depth readout indication must be in meters.
Figure 8-22 Accessing DEPTH UNIT Submenu
(1) Select “ 2:DEPTH UNIT ” by pressing

(numeric key “ 2 ”) , opening the DEPTH
UNIT submenu as shown at right.
- The options available on the submenu
should be self–explanatory.
(2) Select the desired unit by pressing the
appropriate numeric key.
- For example, to read depths in fathoms,
select “ 2:FM ” by pressing

.
(3) Press

to complete the selection.
(4) Press

to exit the menu mode.
MAIN MENU
1:TRANSDUCER DRAFT
2:DEPTH REFERENCE
3:ECHO THRESHOLD
4:NOISE REDUCTION
5:WHITE LINE
6:HISTORY SCALE
7:SIMULATION
8:ECHO DISPLAY
9:INSTALLATION SETTINGS
9:INSTALLATION SETTINGS
1:ECHO COLORS
2:DEPTH UNIT
3:DYNAMIC RANGE
4:UTC/LST(offset)
5:CLOCK PRESET
6:TRANSDUCER SETTINGS
7:DATA OUTPUT PORT
8:BOTTOM MISSING ALM
9:DEPTH READOUT RESPONSE
0:KEY BEEP SETTING
2:DEPTH UNIT
1:m
2:FM
3:FT