Kodak S2000f Series Скачать руководство пользователя страница 28

Страница: 28 / 84

A-61916 August 2019

Document lengths more than 17 inches / 43.2 cm

— if you are

scanning documents longer than 17 inches / 43.2 cm, the scanner driver

must

be set to accommodate these long documents. Be sure to verify that

the

Maximum Length

option on the Device-General tab (TWAIN

Datasource) or the

Longest Document

option on the Scanner tab (ISIS

Driver) is set to longer than the longest document being scanned.

NOTE:

• Operator assistance may be required for scanning documents greater

than 17 inches / 43.2 cm. Other scanner driver settings may limit the
length of the document that you can scan.

• It is recommended that you use a document extender if you are

scanning documents longer than 17 inches (43.2 cm). See page 60 for
a link containing available Supplies and Consumables.

Adjusting the output
tray

You can adjust the output tray to aide in keeping your scanned documents
organized.

•

Adjusting the angle of the output tray

— lift the front of the output tray

and the height adjustment tab will release from underneath the output tray.

To lower the output tray, gently push the height adjustment tab underneath the
output tray while lowering the output tray. This may improve output stacking.

Содержание S2000f Series





















































































Результаты поиска

Содержание S2000f Series

Отзывы:

Похожие инструкции для S2000f Series

Бренды по названию

Популярные бренды

Kodak S2000f Series, Руководство пользователя

Результаты поиска

Содержание S2000f Series

Отзывы:

Похожие инструкции для S2000f Series

Бренды по названию

Популярные бренды