Kodak RP X-OMAT M6B, Руководство по обслуживанию, Страница: 63 / 161

Setting the Film Clear Time
[1] Rotate the DRYER TEMPERATURE
CONTROL KNOB fully counterclockwise
.
[2] Press and release the RUN SWITCH or the
REPLENISHMENT SWITCH.
NOTE
The processor is adjusted at the
factory to operate in the RUN mode for
approximately 2.0 minutes. The total
film clear time adjustment range is 1
minute 12 seconds to 3 minutes 30
seconds. The processor will not go
into standby until the clear time
elapses.
H048_0160AA
H048_0160ACA
SWITCH
RUN
SWITCH
RUN
[3] Adjust POTENTIOMETER R2 to provide the
desired FILM CLEAR TIME. Rotating the
Figure 51 Pressing the Run Switch
POTENTIOMETER clockwise lengthens
the FILM CLEAR TIME. Rotating the
POTENTIOMETER counterclockwise
shortens the FILM CLEAR TIME. See
Figure 50 on page 2-49.
H048_0025BA
H048_0025BCD
SWITCH
REPLENISHMENT
CONTROL
TEMPERATURE
DRYER
Figure 52 Rotating the Dryer Temperature Knob
246628 2-51