Kodak RP X-OMAT M6B, Руководство по обслуживанию, Страница: 49 / 161

Replenishment Check Tubes and Valves
Setting the Replenishment Rate
[1] Remove the RECEIVING-END ACCESS
PANEL from the processor.
[2] Place a GRADUATED CYLINDER under the
REPLENISHMENT CHECK TUBE.
[3] Turn the REPLENISHMENT VALVE to the
‘‘ON’’ position.
[4] Press the REPLENISHMENT SWITCH for 13
seconds.
NOTE
This is the length of time that a sheet
of film 14 inches long, causes the
H048_0135AA
REPLENISHMENT
VALVE
REPLENISHMENT
CHECK TUBE
GRADUATED
CYLINDER
H048_0135ACA
REPLENISHMENT PUMP to operate.
Figure 40 Setting the Replenishment Rate
H048_0025BA
H048_0025BCD
SWITCH
REPLENISHMENT
CONTROL
TEMPERATURE
DRYER
Figure 41 Pressing the Replenishment Switch
246628 2-37