Kodak RP X-OMAT M6B, Руководство по обслуживанию, Страница: 32 / 161

Inner and Outer Bearings
Removing the Inner Bearings
Moving parts.
[1] Disconnect the main power.
[2] Remove the BLOWER MOTOR COVER.
[3] Loosen the BLOWER DRIVE MOTOR
MOUNTING BOLTS.
[4] Remove the BLOWER DRIVE BELT.
[5] Loosen the 2 SETSCREWS on the BLOWER
DRIVE BELT PULLEY.
[6] Remove the BLOWER DRIVE BELT PULLEY.
[7] Loosen the 2 SETSCREWS on the INNER
BEARING.
[8] Remove the 2 NUTS, 2 LOCK WASHERS,
and 2 WASHERS.
[9] Remove the INNER BEARING.
[10] Reverse the procedure to install a new INNER
BEARING.
[11] Ensure that the SETSCREWS align with the
FLATS on the SHAFT.
[12] Set the tension and alignment of the DRIVE
COMPONENTS.
[13] Check the operation of the DRIVE
COMPONENTS.
H048_0139CA
H048_0139CCA
BLOWER
MOTOR
COVER
SETSCREW
BLOWER
DRIVE
BELT
PULLEY
BLOWER
DRIVE
MOTOR
BLOWER
DRIVE
MOTOR
MOUNTING
BOLT
OUTER
BEARING
INNER
BEARING
WASHER (2)
LOCK
WASHER (2)
NUT (2)
Figure 26 Removing the Inner Bearing
2-20 246628