Kodak RP X-OMAT M6B, Руководство по обслуживанию, Страница: 18 / 161

Detector Switches (S7, S8)
Installing the Detector Switches
[1] Install the new DETECTOR SWITCH into the same position.
Checking the Clearance
[1] Check the clearance between the MAGNET and the DETECTOR SWITCH S7. The clearance should be
1.6 - 3.2 mm (1/16 - 1/8 inch).
[2] Loosen the SCREW, and adjust the MAGNET as necessary on the DETECTOR ASSEMBLY.
[3] If the DETECTOR SWITCH is not within specification, do the following adjustment:
Adjusting the Switch
[1] Loosen the MOUNTING SCREWS.
H048_0017BA
H048_0017BCA
DETECTOR
ROLLER
SWITCH S7
SCREW
MAGNET
DETECTOR
CROSSOVER
ASSEMBLY
Figure 8 Adjusting the Detector Switch
2-6 246628