A-61500 January 2004
5-11
Replacing the feed
module or feed
module tires
To replace the feed module or feed module tires:
1. Remove the output tray.
2. Lift up the printer access cover.
3. Open the pod.
4. Push the release lever (located underneath the printer access
cover) to the right to release and remove the feed module.
5. If you are just replacing the feed module:
•
Insert the new feed module by aligning the pins and fitting it into
position. Verify that the feed module is securely in place and
moves freely after you install it.
•
Close the pod and the printer access cover.
•
Reinstall the output tray.
