4-2
A-61500 January 2004
Dynamic print field
options
Sequential Document Number
— the starting sequential document
number is specified by the host during job setup, and has a maximum
of nine digits. You may suppress the printing of leading zeros. The
sequential number increments by one for each document scanned.
If the sequential number rolls over (e.g., three digits are specified,
andthe number 1000 is reached), the scanner stops and displays
anerror.
Date
— this field can be specified to be in MMDDYYYY, DDMMYYYY,
orYYYYMMDD format. Date delimiters (dash, slash, comma, or
blankseparators) may be specified and will be counted as part of
the40-character string length limit.
Time
— this field is in the format HH:MM, where HH is in 24-hour
format. The hours and minutes are separated with a colon (:). This field
therefore uses five characters of the 40-character limit.
Control of the Printer
— any combination of dynamic and static fields
is allowed as long as the total print string does not exceed 40
characters. There is no “default” print string. The format of the print
string, along with the starting sequential document number, if used, is
created on the host and is downloaded to the scanner at the beginning
of each scan session.
Characters can be printed in the following sizes and orientations:
Printing cannot be done within 0.89 cm (0.35 in.) of the leading or
trailing edge of the document. Printing within 0.89 cm (0.35 in.) of the
side edge of a document is not recommended.
Small Comic
Small Cinema
Small Comic 180
Small Cinema 180
Large Comic
Large Cinema
Large Comic 180
Large Cinema 180
