4-6
A-61500 January 2004
Installing an ink
cartridge
You must purge the ink cartridge before installing it (refer to “Purging an
ink cartridge” earlier in this chapter).
NOTE: Additional ink cartridges can be ordered. See Chapter 5,
“Supplies and accessories”
1. Access the document printer.
2. Slide the green ink cartridge carrier out of its slot.
3. Raise the locking bar if it is not already in the raised position.
4. Remove the empty ink cartridge, if one is present.
5. Dispose the empty ink cartridge in accordance with all federal, state
and local laws.
6. Insert a new, purged ink cartridge.
7. Lower the locking bar around the ink cartridge.
IMPORTANT: If you get ink on your hands, wash them with soap and
water.
