A-61500 January 2004
3-13
The Calibration dialog box will be displayed:
6. Select
Image
. Calibration begins. A confirmation box is displayed
when calibration is complete.
7. Click
OK
.
NOTE: If calibration fails, check the Operator Log for details. See
Chapter 6, “Accessing the Operator Log” for more
information. You must wait at least 90 seconds before
calibrating again.
Ultrasonics calibration
Use only an A4 size / 75-80 g/m
2
or lettersize / 20 lb. bond paper to
perform an Ultrasonics calibration.
NOTE: The screens shown in this section are for the TWAIN Data
Source. Your scanner may be different.
1. Center the side guides in the elevator tray and output tray.
2. Place the paper in the elevator tray in portrait orientation.
3. Click
Calibrate
on the Imaging tab.
