KOB KOB PYROMAT DYN, Инструкции по сборке и установке

Страница: 32 / 44

Spec Sheet
ECOTRONIC Heat Control Unit
Heat Consumer
KÖB & SCHÄFER GmbH, Flotzbachstr. 33, A-6922 Wolfurt, Tel. +43/5574/6770-0, Fax 65707, E-Mail: office@koeb-schaefer.com
We reserve the right to make technical changes.
4040-1
2006-02-01_E
Controller for Room Heating Units [Art. No. ECO-H]
A weather-guided heating control system with a digital timer for lowerable operation according to
daily or weekly schedules, with pump control system, frost-protection function, ECOcircuit and
limited flow temperature.
Includes:
- Pushbutton for heating
- Controller output for pump (1) and mixing valve (2)
- Flow sensor QAD 21, uninstalled
Controller for Annex Buildings [Art. No. ECO-N]
How it works:
The pipelining is usually loaded with a lowered temperature according to the weather-
guided heating control system. The domestic water heater is loaded at the maximum
flow temperature set. To do so, a valve deflects the heating water to the domestic
water heater. Using an integrated timer, this is moved to ancillary times, when the
room heating unit is interrupted for short durations.
Includes:
- Pushbutton for annex building
- Controller output for pump (1), mixing valve (1) and changeover valve (3)
-
Flow sensor QAD 21, uninstalled
- Domestic water sensor QAZ 21.5220 with dipping shell ½" x 200 mm, uninstalled
Thermostat QAA 35 [Art. No. ECO-ZR-QA]
Thermostat QAA 35, uninstalled; a supplement to the Controller for Room Heating Units
(Art. No. ECO-H) and Controller for Annex Buildings (Art. No. ECO-N). The Thermostat can be
connected as a remote control device and as a room sensor (room temperature
compensation).
Safety Thermostat SB 2592 [Art. No. ECO-ZR-RA]
Safety Thermostat SB 2592, uninstalled
To safely and reliably limit the flow temperature of a heating circuit (e.g. ECO-H, ECO-N, ECO-
F).
Controller for Pipelining [Art. No. ECO-F]
For annex buildings with separate heat distributions systems, which are
supplied with heat via pipelining. The temperature of the pipeline is pre-adjusted
for the lowest line losses according to the heat distribution requirement.
Includes:
- Pushbutton for pipelining
-
Controller output for pump (1) and control valve (2)
- Flow sensor QAD 21, uninstalled
Note:
The Controller for Pipelining cannot be used to control a pipeline to which
heating control units provided by the customer are connected!
A normal heating control system has to be used in such cases.
SB 2592
annex
building