Spec Sheet
ECOTRONIC Heating Control Unit
Visualisation & Remote Maintenance
KÖB & SCHÄFER GmbH, Flotzbachstr. 33, A-6922 Wolfurt, Tel. +43/5574/6770-0, Fax 65707, E-Mail: [email protected]
We reserve the right to make technical changes.
4090-1
2005-01-31_E
Visualisation of Pyromat Internally
[ECO-VIM]
Visualisation of Pyrot Internally
[ECO-VIR]
All the data is conducted to the PC by a data transmission line (max. 30 m) to the PC via the serial interface RS 232 on
the control module. The burner system's current operational data is shown in visualised fashion in a function display
along with all the possibilities of entering values and functions and of reading out the operational conditions (exception:
"Start Burner"). All the operational data is archived cyclically and can be graphically evaluated in a very simple fashion.
The PC and data transmission line are not included in the price.
Includes:
- CD with visualisation software and installation instructions.
Visualisation Supplementary Function
[ECO-VIZ]
Extended visualisation [ECO- VII] with the functions of the keys additionally activated (from F4). Additional functions
include each heating control unit (heat generator, heat consumer, solar system) as well as the automatic loading system
(Pyromat DYN, Pyrot). Each function of the keys is displayed in a separate function display along with all the
possibilities of entering values, reading out the operational conditions and archiving.
The price is per each additionally activated key on the control module.
Includes:
- Extension of the CD with visualisation software
Note: For equipping possibilities, refer to Spec Sheet 4000-1
Data Transmission Line for Visualisation of Interior
[ECO-ZLV]
Data transmission line consisting of:
-
D-SUB plug for connecting control module to data transmission line, soldered
-
30 m data transmission line, triple-pole (cut to length according to dimension at location)
D-SUB plug with threaded terminal ends, 9-pole, uninstalled, for connecting PC
