Antenna
®
Telescope
™
Antenna
®
Telescope
™
Installation Instructions
October 2018
33
Telescope Dual Table Bases with Beam (with or
without Dual Utility Trays) - Extended Electric
11. Install (8) Rail End Caps (T) onto the ends
of the rails using a rubber mallet.
12. Prepare the leg cradles for the rails by fastening
(2) Cradle Clamp Brackets (D) loosely to each
cradle (C) using (4) ¼-20 x 5/8" flat head
Phillips machine screws (M) per cradle.
Note
: The cradle clamp brackets (D) are
ALWAYS to be placed in the outer position
in the cradle (C), and the end is to be flush
with the face of the housing cover (E).
Dual Table Base with Beam, Rail
Installation, Steps 11 ,12, 13, 14 & 15
Note
: Cradle
Clamp Brackets
(D) in Outer
Position
Rail End Cap (T)
Rails
1/4-20 x 5/8"
Flat Head
Phillips Machine
Screw (M)
Cradle Clamp
Bracket (D)
Horizontal Rail
Cradle (C)