Knick Stratos Pro A4..MSPH series, Инструкция по эксплуатации

Страница: 109 / 148

109
Service
Menu item Remark
IrDA communication:
Select IRDA using ,
press
enter
to confirm.
When IrDA communication is active, the device
remains in the HOLD mode for reasons of safety.
Further operation is performed via IrDA.
End communication with
meas
.
Exception: Firmware update
(must not be interrupted!)
Assigning passcodes:
In the “SERVICE - CODES“ menu you can assign pass-
codes to DIAG, HOLD, CAL, CONF, and SERVICE modes
(Service preset to 5555).
When you have lost the Service passcode
, you have
to request an “ Ambulance TAN“ from the manufac-
turer specifying the serial number of your device.
To enter the “Ambulance TAN“, call the Service func-
tion and enter passcode 7321. After correct input of
the ambulance TAN the device signals “PASS“ for 4 sec
and resets the Service passcode to 5555.
Reset to factory settings:
In the “SERVICE - DEFAULT“ menu you can reset the
device to factory settings.
CAUTION! All individual settings will be overwritten!
Not affected: Calibration data
Release of options:
Options come with a “transaction number“ ( TAN).
This TAN must be entered and confirmed using
enter
to release the option.