Knick Stratos Pro A4..MSPH series, Инструкция по эксплуатации

Страница: 26 / 148

26
Measuring Mode
After the operating voltage has been connected, the device auto-
matically goes to “Measuring“ mode. To call the measuring mode
from another operating mode (e.g. Diagnostics, Service):
Hold
meas
key depressed (> 2 s).
Process
variable
Temperature
Sensoface indicator
(sensor status)
Time
Mode indicator
(measuring)
Active
parameter set
enter
key
In measuring mode the display indicates:
Measured value and time (24/12 h AM/PM) as well as temperature •
in °C or °F (formats selected during confi guration)
By pressing the
meas
key in measuring mode you can view the
following displays (for approx. 60 sec):
Measured value and selection of parameter set A/B •
(if set to “Manual“)
Measured value and tag (point of measurement designation – •
entered during confi guration)
Time and date •
Controller (if confi gured), upper display: controller output Y, •
lower display: setpoint
Pressing the
enter
key shows the output currents. They are displayed
as long as
enter
is held depressed, then the measured-value display
will return after 3 sec.
The device must be confi gured for the respective
measurement task!
Hold
meas
key
depressed to call the
measuring mode
(pressing once more
switches the display)