Knick Stratos Pro A4..MSPH series, Инструкция по эксплуатации

Страница: 99 / 148

99
Measurement
Display Remark
or AM/PM and °F:
From the confi guration or calibration menus,
you can switch the device to measuring
mode by pressing the
meas
key.
In the measuring mode the main display
shows the confi gured process variable (pH,
ORP [mV], or temperature), the second-
ary display shows the time and the second
confi gured process variable (pH, ORP [mV],
or temperature). The [meas] mode indicator
lights and the active parameter set (A/B) is
indicated.
Please note:
After prolonged power outage (> 5 days) •
the time display is replaced by dashes and
cannot be used for processing.
Enter the correct time.
Pressing the
enter
key briefl y shows the output currents.
By pressing the
meas
key you can step through the following
displays. When no key has been pressed for 60 sec, the device
returns to the standard display.
Selecting the 1) parameter set
(if set to “manual“ in the confi guration).
Select the desired parameter set using
the arrow keys (PARSET A or PARSET B
blinks in the lower display line).
Confi rm with
enter
.
Further displays
(each with
meas
).
Display of tag number (“TAG“) 2)
Display of 3) time and date