Knick Stratos Pro A201COND Скачать руководство пользователя страница 8

Страница: 8 / 144

Function Check Mode (HOLD Function)

After activating configuration, calibration, or service, Stratos Pro enters

function check mode (HOLD).

The current outputs respond in accordance with the configuration.

Operations must not be carried out while Stratos Pro is in function

check (HOLD) mode, as the system may behave unexpectedly and put

users at risk.

Control Drawings

If installing in hazardous locations, observe the information provided

on the included Control Drawings.

Devices Not Intended for Use in Hazardous Locations

Devices identified with an N in their product name must not be used

in hazardous locations.

Configuration

Replacing components may affect intrinsic safety. The modules are not

intended to be replaced on devices in the Stratos Pro A201 product

line.

Safety

Содержание Stratos Pro A201COND

















































































































































Результаты поиска

Содержание Stratos Pro A201COND

Отзывы:

Бренды по названию

Популярные бренды

Knick Stratos Pro A201COND, Руководство пользователя

Результаты поиска

Содержание Stratos Pro A201COND

Отзывы:

Бренды по названию

Популярные бренды