manualshive.com logo in svg

Knick SensoGate WA131M, Руководство пользователя

Поделиться
Скачать
Knick SensoGate WA131M Скачать руководство пользователя страница 51

SensoGate WA131M

51

ZU0670/1 air supply for pressurized sensors 

0.5 - 4 bar

ZU0670/2 air supply for pressurized sensors 

1 - 7 bar

ZU0713 hose, 20 m (extension for ZU0670

)

This assembly group maintains the defined gauge pressure in the pressure cham-
ber on versions for liquid-electrolyte sensors.

9.4  Tools

ZU0680 SensoGate Service Set, Basic Equipment

This tool set is suitable for minor maintenance work. It allows easy separation of
the drive unit from the process unit, mounting of an Ingold socket, and replace-
ment of the immersion tube, including O-ring maintenance.

ZU0740 SensoGate Service Set, Maintenance, Repair, Modification

This tool set contains all the tools required to carry out extensive maintenance
and corrective maintenance, as well as to modify the product. SensoGate
WA131M can be fully dismantled using this tool set.

ZU0754 SensoGate Service Set, Calibration Chamber

This tool set is suitable for maintenance work on the calibration chamber and its
seals. It allows easy separation of the split calibration chamber.

ZU0746 Accessory Tool for Scraper Ring

The ZU0746 accessory tool allows easy and correct fitting of the scraper rings in
the calibration chamber of the SensoGate WA131M.

ZU0747 Accessory Tool for O-Rings 20 x 2.5

The ZU0747 accessory tool allows easy and correct fitting of the O-rings 20 x 2.5 in
the calibration chamber of the SensoGate WA131M.

ZU0647 Sensor Spanning Wrench

ZU0647 is used to correctly tighten the sensor without damaging the plastic
thread of the sensor head PG 13.5 due to an excessive tightening torque (e.g., if
using an open-end wrench).

Содержание SensoGate WA131M

































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды