Knick SensoGate WA131M Скачать руководство пользователя страница 19

Страница: 19 / 64

SensoGate WA131M

2.5.4 Immersion Tubes

Note:

The figure shows a selection from the product line.

➜

Product Code, p. 12

Metal immersion tube

, long (204 mm)

Metal immersion tube, shor

t (149 mm)

Plastic immersion tube

, long (204 mm)

Plastic immersion tube, shor

t (149 mm)

2.6 Permissible Changes

SensoGate WA131M can be adapted to changed conditions by the customer. Prior to making any

changes, contact Knick Elektronische Messgeräte GmbH & Co. KG. The following are examples of possi-

ble changes:

• Change to a different process connection

➜

Process Connections, p. 18

• Replacement of process-wetted components (calibration chamber, immersion tube, gaskets) with

other material characteristics

➜

Maintenance, p. 33

• Modification of the sensor holder to fit another sensor type

➜

Drives and Sensor Holders, p. 18

• Retrofit of safeguards, e.g. “Immersion lock without a mounted liquid-electrolyte sensor”

➜

Safeguards, p. 6

Any changes may result in deviations between the information on the nameplate and the actual ver-

sion of the SensoGate WA131M. The operating company is responsible for evaluating the permissibil-

ity of the changes and for documenting and identifying the modified version.
It is recommended that changes to the SensoGate WA131M are carried out by the Knick Repair Ser-

vice. After making the necessary changes, a functional and pressure test is carried out and, if neces-

sary, a modified nameplate is attached.
More information on changes can be found in the related supplementary datasheet. Maintenance

instructions with detailed instructions for action are available on request.

Содержание SensoGate WA131M

































































Результаты поиска

Содержание SensoGate WA131M

Отзывы:

Бренды по названию

Популярные бренды

Knick SensoGate WA131M, Руководство пользователя

Результаты поиска

Содержание SensoGate WA131M

Отзывы:

Бренды по названию

Популярные бренды