manualshive.com logo in svg

Knick SensoGate WA 131 H, Руководство пользователя

Поделиться
Скачать
Knick SensoGate WA 131 H Скачать руководство пользователя страница 26

26

SensoLock (Optional)

Optionally, the WA 131 H is equipped with a SensoLock ring. SensoLock securely blocks the  sensor 

lock-gate in SERVICE position. Turning the SensoLock ring to “LOCK“ position mechanically locks 

the internal lift piston and thus prevents the sensor lock-gate from moving to PROCESS  position.

The SensoLock ring can only be turned in SERVICE position. In PROCESS position and all inter-

mediate positions the SensoLock ring is blocked.

This prevents operation errors. Before starting maintenance work or replacing an electrode,  

you must activate SensoLock (LOCK) to:

•  make sure that the sensor lock-gate is in SERVICE position.

•  prevent that the sensor lock-gate is accidentally moved to PROCESS position.

Turning the SensoLock ring to 

“LOCK“ position prevents the 

immersion in the process when 

the sensor has been removed.

(blocking the travel function,

safety function)

After the sensor has been 

installed, you can unlock the 

travel movement by turning the 

SensoLock ring to “UNLOCK”.

Содержание SensoGate WA 131 H

















































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды