KNF N630 EX, Перевод оригинальной инструкции по эксплуатации и установке

Страница: 115 / 144

EC / EU
– declaration of conformity
HERFORDER ELEKTROMOTOREN-WERKE GmbH & Co. KG
D
– 32051 Herford Goebenstraße 106 Tel.: 05221 59040 info@HEW-HF.de
D
– 32008 Herford post office box 1852
Electrical operating equipment:
Explosion-proof three phase asynchronous motors ( flame-proof encapsulation ) with squirrel cage
Typ marking gas marking dust
DCEx 63 II 2G Ex db e IIC T4-T6 Gb or II 2G Ex db IIC T4-T6 Gb II 3D Ex tc IIIB T135°C - 85°C Dc
DBEx 63 II 2G Ex db e IIB T4-T6 Gb or II 2G Ex db IIB T4-T6 Gb
DDEx 63 II 2G Ex db e IIC T4-T6 Gb or II 2G Ex db IIC T4-T6 Gb II 2D Ex tb IIIC T135°C - 85°C Db
DCEx 71 - 225 II 2G Ex de IIC T4-T6 Gb or II 2G Ex d IIC T4-T6 Gb II 3D Ex tc IIIB T135°C - 85°C Dc
DBEx 71 - 225 II 2G Ex de IIB T4-T6 Gb or II 2G Ex d IIB T4-T6 Gb
DDEx 71 - 225 II 2G Ex de IIC T4-T6 Gb or II 2G Ex d IIC T4-T6 Gb II 2D Ex tb IIIC T135°C - 85°C Db
DCEx 250 and DCEx 280 II 2G Ex db eb IIC T4-T6 Gb or II 2G Ex db IIC T4-T6 Gb II 3D Ex tc IIIB T135°C - 85°C Dc
DBEx 250 and DBEx 280 II 2G Ex db eb IIB T4-T6 Gb or II 2G Ex db IIB T4-T6 Gb
DDEx 250 and DDEx 280 II 2G Ex db eb IIC T4-T6 Gb or II 2G Ex db IIC T4-T6 Gb II 2D Ex tb IIIC T135°C - 85°C Db
DEx 315 II 2G Ex de IIC T4-T6 or II 2G Ex d IIC T4-T6 II 3D Ex tc IIIB T135°C - 85°C Dc
are conform to the regulations of the following European directives:
- EMV- directive 2014/30/EU
- ATEX- directive 2014/34/EU
-
RoHS- directive 2011/65/EU
and
(Amendment Annex II (EU) 2015/863)
- Electric motor Regulation 640/2009/EG
and
(Amendment 4/2014/EU)
The compliance with the provisions of the directives is proved by the following series of standards with all relevant
parts according to the current date:
- DIN EN 60034
-
DIN EN 60079
The following EC-type examination certificate is valid:
D_Ex 63:
SIQ 16 ATEX 142 X 0158 EXAM
D_Ex 71
– 225: BVS 14 ATEX E 114 X
0158 EXAM
D_Ex 250: BVS 19 ATEX E 005 X 0158 EXAM
D_Ex 280: BVS 19 ATEX E 006 X 0158 EXAM
DEx 315: PTB 10 ATEX 1047 X 0158 EXAM
The designated product is to be seen as a component for installation into a machine or system.
Commissioning is prohibited until the conformity of the final product to the directive 2006/42/EC is established.
( M. Scheidt ) Managing Director date 19.08.2019
The safety instructions of the product documentation must be duly observed.
This declaration of conformity is no warranty of the characteristics in the sense of product liability.