Electric motors Size 63 - 225 ATEX / IECEx
Transportation, packaging and storage
2016-05-23
29
Pos : 5. 14 /KN 2006-SM /Transport , Verpac kung und Lager ung/ 006 1.1 Transport _Tit el @ 9\ mod_1145448098995_1. doc @ 90988
5.2 Transportation
Pos : 5. 15 /KN 2006-Pr ojekte/Herf order Elektromot oren-Wer ke/Trans port /005 1. 1. 0 Ansc hl agpunkte @ 54\ mod_1196342213558_1.doc @ 832949
Fastening points
Use suitable lifting gear.
Use the lifting eyebolts provided on the motor.
To transport machine sets (e.g. gear units, fan attachments
etc.) only use the lifting eyebolts and lugs provided. Machine
sets must not be lifted by the individual machines.
Remove any transport safety devices which protect from
bearing damage before commissioning.
Pos : 5.16 /KN 2006-SM /nL---------- Abschnitts ende ---------- @ 8\mod_1141997892953_0.doc @ 75471
Pos : 5. 17 /KN 2006-SM /Transport , Verpac kung und Lager ung/ 006 1.1.0 Transport von Pac kst üc ken mit dem Kr an @ 9\ mod_1144393009755_1. doc @ 86326
Transporting packages by crane
Fig. 7
Packages which have fastening eyebolts can be transported
directly by crane on the following conditions:
The crane and lifting gear must be designed for the weight of
the packages.
The operator must be authorised to operate the crane.
Fastening:
1.
Fasten ropes, belts or multiple-point suspension gear
according to Fig. 7.
2.
Make sure that the package hangs straight, paying attention
to the off-centre centre of gravity as necessary.
3.
Begin transportation.
Pos : 5.18 /KN 2006-SM /nL---------- Abschnitts ende ---------- @ 8\mod_1141997892953_0.doc @ 75471
Pos : 5. 19 /KN 2006-SM /Transport , Verpac kung und Lager ung/ 006 1.1.0 Transport von Pal et ten mit dem Kran @ 9\ mod_1144391982978_1. doc @ 86312
Transporting pallets by crane
Fig. 8
Packages which are fastened to pallets can be transported by
crane under the following conditions:
The crane and lifting gear must be designed for the weight of
the packages.
The operator must be authorised to operate the crane.
Fastening:
1.
Fasten ropes, belts or multiple-point suspension gear to the
pallet according to Fig. 8.
2.
Check that the packages are not damaged by the fastening
equipment. If necessary use other fastening equipment.
3.
Begin transportation.
Pos : 5. 20 /KN 2006-SM /nL---------- Abschnitts ende ---------- @ 8\ mod_1141997892953_0.doc @ 75471
Содержание N0150 EX
