KNF N0150 EX, Перевод оригинальной инструкции по эксплуатации и установке

Страница: 119 / 140

ROTEX
®
Operating/Assembly instructions
KTR-N
Sheet:
Edition: 40210 EN
7 of 27
23
Please observe protection
note ISO 16016.
Drawn: 2019-07-02 Pz/Wb Replacing: KTR-N dated 2017-09-06
Verified: 2019-07-23 Pz Replaced by:
Coupling design:
TB1
Screwing on cam side
TB2 Screwing on collar side
Different combinations of types TB1 and TB2
are possible.
Illustration 5: ROTEX
®
type with taper clamping sleeve
Table 7: Type with taper clamping sleeve
Size
Com-
ponent
Spider
1)
(component 2)
Rated torque [Nm]
Dimensions [mm]
Taper
clamping
sleeve
Finish bore
d (min-max)
General
92 ShA 98 ShA L l
1
, l
2
E b s D
H
D
Z
D
Z1
2)
d
H
D
1
N
24 1a 35 60 10 - 25 64 23 18 14 2.0 55 - - 27 - - 1008
28 1a 95 160 10 - 25 66 23 20 15 2.5 65 - - 30 - - 1108
38 1a 190 325 10 - 25 70 23 24 18 3.0 80 - - 38 78 15 1108
42 1a 265 450 14 - 25 78 26 26 20 3.0 95 - - 46 94 16 1610
48 1a 310 525 14 - 40 106 39 28 21 3.5 105 - - 51 104 28 1615
55 1a 410 685 14 - 50 96 33 30 22 4.0 120 - - 60 118 20 2012
65 1 625 940 14 - 50 101 33 35 26 4.5 135 - - 68 115 5 2012
75 1 1280 1920
16 - 60
144 52 40 30 5.0 160 - - 80 158 36
2517
25 - 75 3020
3)
90 1 2400 3600 25 - 75 149 52 45 34 5.5 200 218 230 100 160 14 3020
100 1 3300 4950 35 - 90 230 90 50 38 6.0 225 246 260 113 180 69 3535
125 1 6650 10000 55 - 110 288 114 60 46 7.0 290 315 330 147 230 86 4545
1) Maximum torque of the coupling T
Kmax.
= rated torque of the coupling T
K rated
x 2
2) D
Z1
= internal diameter of housing
3) Available for type TB2 only
ROTEX
®
couplings with attachments that can generate heat, sparks and static charging
(e. g. combinations with brake drums, brake disks, overload systems such as torque
limiters, fan impellers etc.) are not permitted for the use in potentially explosive
atmospheres.
A separate analysis must be performed.
Please read through these operating/assembly instructions carefully before you start up the coupling.
Please pay special attention to the safety instructions!
The ROTEX
®
coupling is suitable and approved for the use in potentially explosive atmospheres.
When using the coupling in potentially explosive atmospheres, observe the special advice and
instructions regarding safety in enclosure A.
The operating/assembly instructions are part of your product. Please store them carefully and close to the
coupling. The copyright for these operating/assembly instructions remains with KTR.
1 Technical data
2 Advice
2.1 General advice