KNF N0150 EX Скачать руководство пользователя страница 23

Страница: 23 / 140

Diaphragm pump N0150 EX

Installation and connection

Translation of Original Operation and Installation Instruction, english, KNF 321729 11/19

Make sure that access to moving parts is prevented.

The IP protection class of the pump motor is specified on the type
plate.

Mount the pump at the highest point in the system to prevent conden-
sate from collecting in the pump head.

Protect the pump from dust.

Protect the pump from vibration and impact.

Installation position

The pump must be installed in the depicted installation position. Use
metal screws to fasten the pump at the attachment points indicated in
Chapter

Installation and connection

WARNING

Personal injury and/or property damage from vi-
brations

Pump vibrations, in combination with adjacent
components, can result in crushing and/or dam-
age to these components.

Make sure that pump vibrations cannot lead
to dangers in combination with adjacent com-
ponents.

7.2 Electrical connection

DANGER

Danger to life from electric shock

Only have the pump connected by an autho-
rized specialist.

Only have the pump connected if the power
supply is disconnected.

WARNING

Risk of explosion from electrostatic charge

Connect the pump so that the risk of ignition
from electrostatic charge is avoided.

Carefully ground the pump.

When connecting to a power source, observe the applicable standards,
directives, regulations and technical standards.

When connecting to a power source, carefully read and observe the
operating instructions for the motor.

Install a device for separating the pump motor from the electrical mains
in the electrical installation.

It is recommended that an additional emergency-off system be in-
stalled.

Potentially explosive

atmospheres

Only place the electrical equipment in potentially explosive areas that
is necessary there for the operation of the pump.

Take lightning protection measures.

Fastening the connection cables

Fasten the connection cables so that

Содержание N0150 EX













































































































































Результаты поиска

Содержание N0150 EX

Отзывы:

KNF N0150 EX, Перевод оригинальной инструкции по эксплуатации и установке, Страница: 23 / 140

Результаты поиска

Содержание N0150 EX

Отзывы: