28
Set the main switch (3-4/8) to “I”. Wait for the
controls to initialize.
Switch on the control unit with the “Control ON”
button (6-3/1) when the “Control ON” button
(6-3/1) starts flashing.
ATTENTION
In manual mode, switch on the polishing unit
(see section 8.1).
Under no circumstances should the grinding
program be activated using the “Start / Stop”
button (3-4/4).
Check the direction of rotation of the polishing
and deburring rings.
If required, interchange the phases in the power
plug.
6. Commissioning
Figure 6-3
Control panel
Figure 6-4
Checking the direction of rotation
1
