23
18
“Polishing paste 2 pulse”: Feed polishing paste 2 one time
19
“STOP cycle”: Stop processing after the currently active knife
20
“Home position”: Run machine to initial position
21
“Magazine 1 changed”: Pressing 1x sets the magazine back by one knife. Pressing for 2 sec
sets the entire magazine back.
22
“Reset”: Reset control
23
“Belt change”: triggers “Replace grinding belt” message (press for 2 sec)
24
“Settings” switches to the “Settings” view
25
“Magazine 2 changed”: Pressing 1x sets the magazine back by one knife. Pressing for 2 sec
sets the entire magazine back.
26
“Cancel program”: cancel current knife program and begin grinding process from
beginning
27
“Product data”: load different grinding program (for product file loaded, see (3-6/2))
28
“Back”: switch to previous view or close user interface
NOTICE
When the key-operated switch (3-4/7) is on
position “1”, the knife gripper (3-3/2) can be
activated even when the door is open.
The “Polishing paste 1 pulse” (3-6/17) and
“Polishing paste 2 pulse” (3-6/18) only work
in automatic mode while the polishing unit is
on.
Removing the knife magazine resets the
machine.
The key-operated switch is to be operated only by specialized trained
personnel.
If the key-operated switch (3-4/7) is on position “1”, there is a pinching
hazard from the knife magazine.
CAUTION
3. Description
