33
Figure 7-9
Adjusting the wet-grinding belt
7.2.1 Adjusting the wet-grinding belt
The grinding belts must be configured in such a
way that they each protrude about 3 mm forward
over the contact disc.
Adjust the belt using the provided star handle
(7-10/1).
Open the protective doors.
The belt is adjusted on the underside of the grind-
ing device.
To adjust the left wet-grinding belt, set the
provide star handle (7-11/1) onto the pivot rod
(7-11/2).
Then rotate until the left wet-grinding belt runs
approx. 3 mm in front of the contact disc.
Remove the star handle from the left pivot rod
and set onto the right pivot rod (7-11/3). Set the
right wet-grinding belt in the same manner.
Clockwise rotation = the grinding belt moves
forward.
Counterclockwise rotation = the grinding belt
moves back.
7. Operation
Figure 7-10
Star handle for belt adjustment
1
Figure 7-11
Aligning the wet-grinding belt
2
3
1
