32
If the first message was answered with “Yes”
(7-6/1), the message “Was the grinding belt
changed?” appears.
Answer the question with “Yes” (7-7/1), if a new
wet-grinding belt has been attached.
If the grinding belt was only rotated, answer the
message with “No” (7-7/2).
If the grinding belts were rotated successfully, an
arrow will appear on the main screen near the
grinding time (7-8/1).
NOTICE
After the wet-grinding belts have been
replaced or rotated, perform a trial run. If the
machine behaves unusually, take it out of
service and correct the cause.
ATTENTION
If new wet-grinding belts were attached, the
message must be answered with “Yes”
(7-7/1).
After replacing, the machine begins the
grinding process in a higher position. This
ensures a lower material removal on the
knife.
7. Operation
Figure 7-7
“Has the belt been replaced?”
message
Figure 7-8
Main screen
1
1
2
