Knauer Azura V 2.1S, Руководство пользователя

Страница: 24 / 51

24 Installation
AZURA V 2.1S User Manual, V6860, Version 2.2
2. Hook up the router to the devices and the computer.
3. On the computer, configure the router to set up the network.
4. Install the chromatography software from the data storage device.
5. Switch on the device and run the chromatography software.
Configuring the LAN Settings
The LAN uses only one server (which is normally the router) from that the
devices automatically receive their IP address.
Prerequisite

In Windows
®
, power saving, hibernation, standby, and screen saver must be
deactived.

In case you use an USB-to-COM box, the option "Allow the computer to turn
off ths device to save power" in the devicemanager must be deactivated for
all USB hosts.

Only for Windows 7: For the network adapter, the option "Allow the com-
puter to turn off this device to save power" in the Device Manager must be
deactivated.
Process
1. In Windows 7 choose
Start

Control Panel

Network and Sharing Center .
2. Double-click on LAN Connection .
3. Click on the button
Properties
.
4. Select
Internet Protocol version 4 (TCP/IPv4)
.
5. Click on the button
Properties
.
6. Check the settings in the tab
General
. The correct settings for the DHCP cli-
ent are:

a)
Obtain IP address automatically

b)
Obtain DNS server address automatically
7. Click on the button OK .
Connecting the Cables
A router
3
has several LAN ports
2
and one WAN port
4
that can be used to
integrate the LAN into a wide area network (WAN), e.g. a company network or
the Internet. In contrast, the LAN ports serve to set up a network from devices
1
and a computer
5
. To avoid interference, we recommend operating the
HPLC system separately from the company network.