Klingenburg CERTO, Документация

Страница: 7 / 52

7
Pump group
Other properties:
Stable sheet steel system frame, with baked enamel,
colour RAL 5015
With attached shock absorbers for interior installation on
load-bearing support surface
The maintenance-friendly design permits easy access
to all components
The speed-controlled pump operation allows continuous
adaptation of the water quantity to achieve the required
air humidity
Power transmission by sturdy toothed-belt technology,
individually designed for optimal efficiency and broad
control range
The CERTO safety package:
Integrated water filter for the retention of possible impu-
rities in the supply system and for the protection of the
high-pressure pump against particulate matter
Closed inspection cover on drive housing as protection
against injuries due to contact with rotating parts
Check valve and solenoid valve for switching off water
intake during standstill
Manometer on the low-pressure side and the high-pres-
sure side for visual control of the pressures in the system
Low-pressure switch as dry-running protection for pump,
high pressure switch for limiting maximum allowed op-
erational pressure
The electrical connections are joined in a terminal box
and pre-wired. Connection is by modular terminals con-
nected to the same terminals of the control unit.
1
4
2
3
8
9
10
5
6
7
Pump station weighs from 60 to 80 kg and contains:
High pressure pump
Drive motor
Belt drive
Magnet valve for water supply shutoff
Pressure sensor on low pressure side
Pressure sensor on high pressure side
2 manometers
Water filter 100 µm
Solenoid valve for hygienic cleaning
500 m
m
6
5
0 m
m
540
mm
1 Drive motor
2 Speed-controlled high-pressure pump
3
Electrical distributor terminal box
4
Water filter with low-pressure switch
5
System frame with shock absorbers
6
Solenoid valve / water supply from reverse
osmosis unit
Connection size at the entrance over DN13
or 1/2 inch.
7
High-pressure block with high-pressure
safety switch and water supply to CERTO
8
Solenoid valve for integrated hygienic
control
Connection size at the entrance over DN13
or 1/2 inch.
9
Drip-protection pan
10
High-pressure solenoid valve
for load control