Klingenburg CERTO, Документация

Страница: 43 / 52

43 43
Operation instructions controller
+ B - Ü - S - T + A
+ H + 2 - 3 - 4 - R
B
Status message
Ü
Overpressure message
S
Maintenance message
T
Follow-up drying run
A
Water treatment
H
Main valve intake
2
2nd level
3
3rd level
4
4th level
R
Backflushing
O v e r p r e s s u r e
1 1 3 : 5 8 0 6 . 0 6 . 1 1
3x : Status display of the 10 relays
A“+” in front of the letter equals: “Relay output connected”
A “-” in front of the letter equals: “Relay output open”
4x : Most recent fault message
5x : Second most recent fault message
6x : Third most recent fault message
The three most recent faults are saved.
To return to the normal display, press the right selection key (
) repeatedly.
The operation pause is a parameter item in the controller
menu that allows to temporarily shut down the humidifier
without switching off the power supply. When this option is
active, the message Operation pause lights up blue in the
display. In the active operating pause, the rinsing function
and the external control of the control unit are deactivated.
This option should only be used if the humidifier has pre-
viously been taken out of operation. This means that all
water-bearing parts must have been drained. Otherwise,
there is a risk of contamination by water passing through.
The activation and deactivation of the operat-
ing pause is integrated under the menu item Main-
tenance in the control unit of the control device.
!
Special function operating pause!