Klingenburg CERTO, Документация

Страница: 22 / 52

22 22
Maintenance and operation
General points:
Generally speaking, VDI 6022 should be observed for
the maintenance and operation of the humidifier. This
particularly includes compliance with the time cycles
specified in the annex to VDI 6022 for checking (e.g. for
impurities and faults) and maintenance measures. De-
pending on the respective local conditions (e.g. circulato-
ry air operation), it may also be necessary to expand the
scope of these measures.
Components
Klingenburg Humifier
Pump station
Controller
Spare parts and consumables
The components listed here are considered wear parts
and are not covered by the manufacturer‘s warranty.
HP pump (NP 10/01-160; NP 10/02-160; 10/04-140; NP
10/10-140; NP 10/13-140; NP 10/15-140; NP 16/21-140)
Valve set for HP pump
Seal set for HP pump
Toothed belt
High-pressure switch (135/150 bar)
Low-pressure switch (1,6/2 bar)
Magnetic valve NP / HP
Low-pressure manometer
High-pressure manometer
Seal set nozzle holder
Seal for high-pressure nozzle
High-pressure nozzle
Nozzle screen
Filter unit (made by Brauckmann F 76 (S) 100 µm)
a detailed list of spare parts can be found on page
48.
Safety instructions and warnings
Before installing and setting up the frequency converter,
please read the product manual carefully and observe
all warning and safety instructions. Ensure this product
manual is always easily accessible in the vicinity of the
frequency converter.
Definition of safety notes:
Warning!
Non-compliance with this safety note may result in death,
serious bodily injury or considerable damage to property.
Caution
Non-compliance with this safety note may result in minor
physical injury or damage to property.
Before commencing maintenance operations,
the system must be switched off!
Maintenance and operation
Maintenance and Operation
!
Attention !