www.klever-mobility.com
www.klever-mobility.com
66
67
Page 1 of 2
CERTIFICATE OF CONFORMITY ACCOMPANYING EACH VEHICLE
IN THE SERIES OF THE TYPE WHICH HAS BEEN APPROVED
EU CERTIFICATE OF CONFORMITY
The undersigned:
hereby certifies that the following complete vehicle:
0.1.
Make (trade name of the manufacturer): Klever
0.2.
Type: X4
0.2.1.
Variant: KY8P
0.2.2.
Version: N.A.
0.2.3.
Commercial name (if available): X Alpha 45
0.3.
Category, subcategory and sub-subcategory of vehicle: L1e-B
0.4.
Company name and address of manufacturer:
KLEVER MOBILITY INC.
No. 4-1, 6, 8, Ln. 76, Sec. 3, Zhongyang Rd., Tucheng Dist., New Taipei City 236, Taiwan, R.O.C.
0.4.2.
Name and address of manufacturer’s authorised representative (if any):
KLEVER MOBILITY EUROPE GmbH
Dieselstr. 8, 50859 Koln, Germany
0.5.1.
Location of the manufacturer's statutory plate(s): C, x350, y0, z890
0.5.2.
Method of attachment of the manufacturer's statutory plate(s):
Sticker on the bottom of top tube near head tube
0.6.
Location of the vehicle identification number: R, x630, y20, z360
1.
Vehicle identification number: RHKX12L03XXXXXXXX
conforms in all respects to the type described in EU type-approval (e13*168/2013*00282*03)
issued on (
Jan 15, 2021
)
and can be permanently registered in Member States having right/left-hand traffic and
using metric/imperial units for the speedometer.
Place: Date:
Signature:
Page 2 of 2
VEHICLE CATEGORY L
General construction characteristics
1.3.
Number of axles
：
2 and wheels
：
2
1.3.2.
Powered axles
：
R
Main dimensions
2.2.1. Length
：
1880 mm
2.2.2. Width
：
670 mm
2.2.3. Height
：
1100 mm
2.2.4. Wheelbase
：
1120 mm
Masses
2.1.1.
Mass in running order
：
28 kg (propulsion battery excluded)
2.1.2.
Actual mass
：
108 kg
2.1.3.
Technically permissible maximum laden mass
：
150 kg
2.1.3.1.
Technically permissible maximum mass on front axle
：
45 kg
2.1.3.2.
Technically permissible maximum mass on rear axle
：
105 kg
Powertrain
3.1.2.1. Manufacturer
：
Kwang Yang Motor Co., Ltd.
3.1.2.2.
Electric motor code (as marked on the engine or other means of identification)
：
K30B021P
3.3.3.4.
15/30 minutes power
：
0.8 kW
3.3.1.
Electric vehicle configuration
：
pure electric/hybrid electric/manpower-electric
3.9.2.
Maximum assistance factor
：
3.0
Maximum speed
1.8.
Maximum speed of vehicle
：
45 km/h
3.9.3.
Maximum vehicle speed for which the electric motor gives assistance
：
45 km/h
Drive-train and control
3.5.3.9.
Transmission (type)
：
O
3.5.4.
Gear ratios
：
N.A.
3.5.4.1.
Final drive ratio
：
N.A.
Installation of tyres
6.18.1.1.
Tyre size designation
：
Axle 1 and 2
：
57-584 (57/110-23 M/C), 35B, 300 kPa, 584 mm×30 mm
Bodywork
6.16.1.
Number of seating positions
：
1
Environmental performance
4.0.1.
Environmental step
：
Euro 3/4/5/5+
4.0.6.
Sound level measured according to
：
N.A.
4.0.6.1. Stationary
：
N.A.
4.0.6.2. Drive-by
：
N.A.
4.0.6.3.
Limit value for L
urban
：
N.A.
3.2.15.
Exhaust emissions measured according to
：
N.A.
3.2.15.1.
Type I test: tailpipe emissions after cold start, including the deterioration factor, if applicable
：
N.A.
3.2.15.2.
Type II test: tailpipe emissions at (increased) idle and free acceleration
：
N.A.
3.2.15.3.
Smoke corrected absorption coefficient
：
N.A.
Energy efficiency
4.0.4.
Energy consumption
：
16 Wh/km
Additional information
9.1. Remarks
：
N.A.
9.2. Exemptions
：
N.A.
Page 1 of 2
CERTIFICATE OF CONFORMITY ACCOMPANYING EACH VEHICLE
IN THE SERIES OF THE TYPE WHICH HAS BEEN APPROVED
EU CERTIFICATE OF CONFORMITY
The undersigned:
hereby certifies that the following complete vehicle:
0.1.
Make (trade name of the manufacturer): Klever
0.2.
Type: X4
0.2.1.
Variant: TD6P
0.2.2.
Version: N.A.
0.2.3.
Commercial name (if available): X Speed Pinion
0.3.
Category, subcategory and sub-subcategory of vehicle: L1e-B
0.4.
Company name and address of manufacturer:
KLEVER MOBILITY INC.
No. 4-1, 6, 8, Ln. 76, Sec. 3, Zhongyang Rd., Tucheng Dist., New Taipei City 236, Taiwan, R.O.C.
0.4.2.
Name and address of manufacturer’s authorised representative (if any):
KLEVER MOBILITY EUROPE GmbH
Dieselstr. 8, 50859 Koln, Germany
0.5.1.
Location of the manufacturer's statutory plate(s): C, x350, y0, z890
0.5.2.
Method of attachment of the manufacturer's statutory plate(s):
Sticker on the bottom of top tube near head tube
0.6.
Location of the vehicle identification number: R, x630, y20, z360
1.
Vehicle identification number: RHKX12L03XXXXXXXX
conforms in all respects to the type described in EU type-approval (e13*168/2013*00282*04)
issued on (
Oct 25,2021
)
and can be permanently registered in Member States having right/left-hand traffic and
using metric/imperial units for the speedometer.
Place:
Date:
Signature:
Page 2 of 2
VEHICLE CATEGORY L
General construction characteristics
1.3.
Number of axles
：
2 and wheels
：
2
1.3.2.
Powered axles
：
R
Main dimensions
2.2.1. Length
：
1880 mm
2.2.2. Width
：
670 mm
2.2.3. Height
：
1100 mm
2.2.4. Wheelbase
：
1120 mm
Masses
2.1.1.
Mass in running order
：
28 kg (propulsion battery excluded)
2.1.2.
Actual mass
：
108 kg
2.1.3.
Technically permissible maximum laden mass
：
150 kg
2.1.3.1.
Technically permissible maximum mass on front axle
：
45 kg
2.1.3.2.
Technically permissible maximum mass on rear axle
：
105 kg
Powertrain
3.1.2.1. Manufacturer
：
TDCM CORPORATION LIMITED
3.1.2.2.
Electric motor code (as marked on the engine or other means of identification)
：
K30B016P
3.3.3.4.
15/30 minutes power
：
0.6 kW
3.3.1.
Electric vehicle configuration
：
pure electric/hybrid electric/manpower-electric
3.9.2.
Maximum assistance factor
：
2.8
Maximum speed
1.8.
Maximum speed of vehicle
：
45 km/h
3.9.3.
Maximum vehicle speed for which the electric motor gives assistance
：
45 km/h
Drive-train and control
3.5.3.9.
Transmission (type)
：
O
3.5.4.
Gear ratios
：
N.A.
3.5.4.1.
Final drive ratio
：
N.A.
Installation of tyres
6.18.1.1.
Tyre size designation
：
Axle 1 and 2
：
57-584 (57/110-23 M/C), 38B, 300 kPa, 584 mm×30 mm
Bodywork
6.16.1.
Number of seating positions
：
1
Environmental performance
4.0.1.
Environmental step
：
Euro 3/4/5/5+
4.0.6.
Sound level measured according to
：
N.A.
4.0.6.1. Stationary
：
N.A.
4.0.6.2. Drive-by
：
N.A.
4.0.6.3.
Limit value for L
urban
：
N.A.
3.2.15.
Exhaust emissions measured according to
：
N.A.
3.2.15.1.
Type I test: tailpipe emissions after cold start, including the deterioration factor, if applicable
：
N.A.
3.2.15.2.
Type II test: tailpipe emissions at (increased) idle and free acceleration
：
N.A.
3.2.15.3.
Smoke corrected absorption coefficient
：
N.A.
Energy efficiency
4.0.4.
Energy consumption
：
16 Wh/km
Additional information
9.1. Remarks
：
N.A.
9.2. Exemptions
：
N.A.
Page 1 of 2
CERTIFICATE OF CONFORMITY ACCOMPANYING EACH VEHICLE
IN THE SERIES OF THE TYPE WHICH HAS BEEN APPROVED
EU CERTIFICATE OF CONFORMITY
The undersigned:
hereby certifies that the following complete vehicle:
0.1.
Make (trade name of the manufacturer): Klever
0.2.
Type: X4
0.2.1. Variant: KY8P
0.2.2. Version: N.A.
0.2.3. Commercial name (if available): X Alpha 45
0.3.
Category, subcategory and sub-subcategory of vehicle: L1e-B
0.4.
Company name and address of manufacturer:
KLEVER MOBILITY INC.
No. 4-1, 6, 8, Ln. 76, Sec. 3, Zhongyang Rd., Tucheng Dist., New Taipei City 236, Taiwan, R.O.C.
0.4.2. Name and address of manufacturer’s authorised representative (if any):
KLEVER MOBILITY EUROPE GmbH
Dieselstr. 8, 50859 Koln, Germany
0.5.1. Location of the manufacturer's statutory plate(s): C, x350, y0, z890
0.5.2. Method of attachment of the manufacturer's statutory plate(s):
Sticker on the bottom of top tube near head tube
0.6.
Location of the vehicle identification number: R, x630, y20, z360
1.
Vehicle identification number: RHKX12L03XXXXXXXX
conforms in all respects to the type described in EU type-approval (e13*168/2013*00282*03)
issued on (
Jan 15, 2021
) and can be permanently registered in Member States having right/left-hand traffic and
using metric/imperial units for the speedometer.
Place: Date:
Signature:
Page 2 of 2
VEHICLE CATEGORY L
General construction characteristics
1.3.
Number of axles
：
2 and wheels
：
2
1.3.2.
Powered axles
：
R
Main dimensions
2.2.1. Length
：
1880 mm
2.2.2. Width
：
670 mm
2.2.3. Height
：
1100 mm
2.2.4. Wheelbase
：
1120 mm
Masses
2.1.1.
Mass in running order
：
28 kg (propulsion battery excluded)
2.1.2.
Actual mass
：
108 kg
2.1.3.
Technically permissible maximum laden mass
：
150 kg
2.1.3.1.
Technically permissible maximum mass on front axle
：
45 kg
2.1.3.2.
Technically permissible maximum mass on rear axle
：
105 kg
Powertrain
3.1.2.1. Manufacturer
：
Kwang Yang Motor Co., Ltd.
3.1.2.2.
Electric motor code (as marked on the engine or other means of identification)
：
K30B021P
3.3.3.4.
15/30 minutes power
：
0.8 kW
3.3.1.
Electric vehicle configuration
：
pure electric/hybrid electric/manpower-electric
3.9.2.
Maximum assistance factor
：
3.0
Maximum speed
1.8.
Maximum speed of vehicle
：
45 km/h
3.9.3.
Maximum vehicle speed for which the electric motor gives assistance
：
45 km/h
Drive-train and control
3.5.3.9.
Transmission (type)
：
O
3.5.4.
Gear ratios
：
N.A.
3.5.4.1.
Final drive ratio
：
N.A.
Installation of tyres
6.18.1.1. Tyre size designation
：
Axle 1 and 2
：
57-584 (57/110-23 M/C), 35B, 300 kPa, 584 mm×30 mm
Bodywork
6.16.1.
Number of seating positions
：
1
Environmental performance
4.0.1.
Environmental step
：
Euro 3/4/5/5+
4.0.6.
Sound level measured according to
：
N.A.
4.0.6.1. Stationary
：
N.A.
4.0.6.2. Drive-by
：
N.A.
4.0.6.3.
Limit value for L
urban
：
N.A.
3.2.15.
Exhaust emissions measured according to
：
N.A.
3.2.15.1. Type I test: tailpipe emissions after cold start, including the deterioration factor, if applicable
：
N.A.
3.2.15.2. Type II test: tailpipe emissions at (increased) idle and free acceleration
：
N.A.
3.2.15.3. Smoke corrected absorption coefficient
：
N.A.
Energy efficiency
4.0.4.
Energy consumption
：
16 Wh/km
Additional information
9.1. Remarks
：
N.A.
9.2. Exemptions
：
N.A.
Page 1 of 2
CERTIFICATE OF CONFORMITY ACCOMPANYING EACH VEHICLE
IN THE SERIES OF THE TYPE WHICH HAS BEEN APPROVED
EU CERTIFICATE OF CONFORMITY
The undersigned:
hereby certifies that the following complete vehicle:
0.1.
Make (trade name of the manufacturer): Klever
0.2.
Type: X4
0.2.1. Variant: TD6P
0.2.2. Version: N.A.
0.2.3. Commercial name (if available): X Speed Pinion
0.3.
Category, subcategory and sub-subcategory of vehicle: L1e-B
0.4.
Company name and address of manufacturer:
KLEVER MOBILITY INC.
No. 4-1, 6, 8, Ln. 76, Sec. 3, Zhongyang Rd., Tucheng Dist., New Taipei City 236, Taiwan, R.O.C.
0.4.2. Name and address of manufacturer’s authorised representative (if any):
KLEVER MOBILITY EUROPE GmbH
Dieselstr. 8, 50859 Koln, Germany
0.5.1. Location of the manufacturer's statutory plate(s): C, x350, y0, z890
0.5.2. Method of attachment of the manufacturer's statutory plate(s):
Sticker on the bottom of top tube near head tube
0.6.
Location of the vehicle identification number: R, x630, y20, z360
1.
Vehicle identification number: RHKX12L03XXXXXXXX
conforms in all respects to the type described in EU type-approval (e13*168/2013*00282*04)
issued on (
Oct 25,2021
) and can be permanently registered in Member States having right/left-hand traffic and
using metric/imperial units for the speedometer.
Place:
Date:
Signature:
Page 2 of 2
VEHICLE CATEGORY L
General construction characteristics
1.3.
Number of axles
：
2 and wheels
：
2
1.3.2.
Powered axles
：
R
Main dimensions
2.2.1. Length
：
1880 mm
2.2.2. Width
：
670 mm
2.2.3. Height
：
1100 mm
2.2.4. Wheelbase
：
1120 mm
Masses
2.1.1.
Mass in running order
：
28 kg (propulsion battery excluded)
2.1.2.
Actual mass
：
108 kg
2.1.3.
Technically permissible maximum laden mass
：
150 kg
2.1.3.1.
Technically permissible maximum mass on front axle
：
45 kg
2.1.3.2.
Technically permissible maximum mass on rear axle
：
105 kg
Powertrain
3.1.2.1. Manufacturer
：
TDCM CORPORATION LIMITED
3.1.2.2.
Electric motor code (as marked on the engine or other means of identification)
：
K30B016P
3.3.3.4.
15/30 minutes power
：
0.6 kW
3.3.1.
Electric vehicle configuration
：
pure electric/hybrid electric/manpower-electric
3.9.2.
Maximum assistance factor
：
2.8
Maximum speed
1.8.
Maximum speed of vehicle
：
45 km/h
3.9.3.
Maximum vehicle speed for which the electric motor gives assistance
：
45 km/h
Drive-train and control
3.5.3.9.
Transmission (type)
：
O
3.5.4.
Gear ratios
：
N.A.
3.5.4.1.
Final drive ratio
：
N.A.
Installation of tyres
6.18.1.1. Tyre size designation
：
Axle 1 and 2
：
57-584 (57/110-23 M/C), 38B, 300 kPa, 584 mm×30 mm
Bodywork
6.16.1.
Number of seating positions
：
1
Environmental performance
4.0.1.
Environmental step
：
Euro 3/4/5/5+
4.0.6.
Sound level measured according to
：
N.A.
4.0.6.1. Stationary
：
N.A.
4.0.6.2. Drive-by
：
N.A.
4.0.6.3.
Limit value for L
urban
：
N.A.
3.2.15.
Exhaust emissions measured according to
：
N.A.
3.2.15.1. Type I test: tailpipe emissions after cold start, including the deterioration factor, if applicable
：
N.A.
3.2.15.2. Type II test: tailpipe emissions at (increased) idle and free acceleration
：
N.A.
3.2.15.3. Smoke corrected absorption coefficient
：
N.A.
Energy efficiency
4.0.4.
Energy consumption
：
16 Wh/km
Additional information
9.1. Remarks
：
N.A.
9.2. Exemptions
：
N.A.
20.2 Model X Speed Pinion & X Pinion 45
20. Annex Certificates of
Conformity
20.1 Model X Alpha 45
Image 76
Image 77
Certificate of Conformity - X Speed Pinion
Certificate of Conformity - X Alpha 45
