ACCESSORY/STRUCTURE
HOW TO INSTALL
BATTERY INDICATOR
When the device is power-on, the power button light will indicatethe battery level.
When the device is power-off, short press the power button to activate the indicator light
(light will shut down automatically after 2 seconds).
PHONE CHARGING INSTRUCTION
*External charging cable needs to be purchased additionally
To prevent potential damage from high heat or even fire, it is very important to put the bicycle
light in lock mode and protect the switch from being pressed.
MAGICSHINE will not be held responsible for damages to person or property resulting from a
failure to follow the 'lock' mode instructions.
To lock -
When the light is off, press and hold the power button down for 5 seconds until the indicator
light flashes red.
To unlock -
When the light is locked, press and hold down the power button for 5 seconds until the
indicator light constant red.
MODE MEMORY FUNCTION :
When you turn the light on, it lights up in the last lighting
mode you used.
MODE SELECTION :
In standby mode, press the up/down button at the same time to enter
mode selection. Press the up button to select smart mode(constant blue) or press the down
button to select normal mode(flash blue).
Press the up/down button at the same time to confirm the selection mode.
SMART MODE-LIGHT SENSOR :
The light sensor monitors ambient light to adjust light
output accordingly. During daytime, light's output automatically switches to dual beam with
40lumens.When entering a tunnel or shortly after sun down, light's output automatically
switches to original setting within seconds.
SMART MODE-VIBRATION SENSOR :
An integrated vibration sensor detects the end of a ride
and automatically turns off the light after 3 minutes. Any further movement will turn the light
back on.
Hold 1s power button to turn on/off
SWITCHING THE LIGHTING MODE
LOCK MODE
RAY 2600 USER MANUAL
3mm Hex
Type-C USB Cable
Aero bar compatible strap
Gopro mount
1
4
2
3
5
RED
11%-20%
FLASH RED
0%-10%
GREEN
21%-100%
HOW TO RECHARGE
Charging
FLASH RED
Fully charged
GREEN
Standard charging time
Approx.2.5hrs (18W)
RAY 2600
Remote control
Handlebar mount
1 x click
1 x click
1 x click
1 x click
1 x click
1 x click
1 x click
1 x click
1 x click
1 x click
Long press to power on/off
D
ouble-click
D
ouble-click
D
ouble-click
D
ouble-click
