www.klever-mobility.com
www.klever-mobility.com
16
17
E-Key
6.4 Display
With the display you start and control the BIACTRON-system.
Upon purchase of your X Speed model, your Klever dealer
will pair the speed pedelec with a set of two E-KEYs with a
unique ID code. After the pairing your speed pedelec will only
function and start with these E-KEYs with the dedicated and
programmed ID code. It is impossible to activate your X Speed
with other E-KEYs from other bikes.
Now you can start the system WITH or WITHOUT
inserting the E-KEY (see section 6.4.3).
Every press of a display button will be confirmed with a short
acoustic signal. As soon as you insert the E-KEY into the display
(image 11), the system will start. With the E-KEY already in the
display while the system is off, there are two ways to activate
the system:
1. Press the On/Off button
(image 10), after a 3 seconds
system check your speed pedelec is ready to be pedalled.
2. Just start pedalling, the electric system will wake up
automatically.
After a 3 seconds system check, the electric
drive will start to support.
Please note! These 3 options will only function while
you keep the
á
(TURBO) button pushed. As soon as you
release the
á
(TURBO) button, the electric motor support
will stop. Except in the latter case of pedalling: in that
case after releasing the
á
(TURBO) button the level of
electric motor support will go back to the preselected
level (TOUR as in the example of scenario 3).
In order to save battery power, the support level will
automatically be limited to the TOUR level when the battery
capacity drops to 10%. When the battery capacity drops to 5%
the support level will be limited to the ECO level and in the
case of a battery capacity of 2% or less the level will be N.
6.3 Recuperation of battery capacity:
regeneration
The Klever BIACTRON system of your speed pedelec has an
innovative, unique feature: the recovery of battery capacity, also
known as regeneration. Every time the drive system goes into
freewheel, coasting mode, the BIACTRON system will start braking
the motor. As a consequence, the motor friction is being converted
into electricity that is being stored into the battery. The freewheel
mode will be activated once you do not pedal and roll out to a traffic
light or you coast down a hill or mountain without having to pedal.
Also, when actuating the brake levers with the built-in brake sensor,
the regeneration function will be activated while the disc brakes
start to brake the wheels.
Section 6.4.3 (menu for settings) explains how this function can
be activated and adjusted to your personal preferences. The
regeneration function is a nice and clean addition to the capacity,
consumption and range of your battery. The more and longer you
ride in a mountainous environment, the more you will benefit from
this function. However, the recovery of electricity is limited and
depends to a large extent on your riding behaviour, the environment
where you ride and the chosen regeneration settings.
Display
The BIACTRON system
Turbo
(
á
)
( )
( )
Info (•)
Image
10
Support level
details
Support
level name
High/low
beam lights
E-Key
indicator
Power
consumption
Regen power
General
warnings
* Visit your dealer if the
warning signal continues to
appear on the display
Bluetooth
Warning
icon
L
ight
Power
On?Off
Battery
indicator
E-KEY port
Current
speed
D-Info
Image 11
