www.klever-mobility.com
www.klever-mobility.com
26
27
15
With this option the motor support levels increase gradually
in 15 steps from 1 to 15. From ECO in level 1 (least support) you
go with the
(↑)
and
(↓)
button in 15 steps linearly to MAX in
level 5 (max support). This can be done during cycling and
there is no need to go back to the Assist menu.
Setting
>
REGEN
Regen means the regeneration and recuperation of
electric energy back into the battery pack (see section 6.3
Regeneration). There are two regen functions:
• Regeneration through braking: on/off
• Regeneration while coasting and freewheeling: on/off
And both braking as well as coasting regeneration have 5
levels of regeneration:
• Automatic
• -1 (light)
• -2 (medium)
• -3 (strong)
• 0 (no regeneration).
The Regen factory default setting has regeneration turned off
for both braking as well as for coasting.
Please note: Braking regeneration is only available on the
45 km/h Type-approval models. It is not available for 25
km/h EPAC-models.
Submenu MORE
With the submenu MORE you can adjust following
parameters: the language of the display, the information
displayed during riding, the clock, weight of the cyclist,
settings for the E-KEY and the display settings. Also, you can
connect your smart phone through Bluetooth with the Klever
display and you can reset trip and calories to zero.
Setting MORE > Language
The display can be shown in the language of your choice (NE,
DE, EN, FR, IT, US).
Setting MORE > Status bar
Seven types of information can be shown on the major display
by default. With a short press of the INFO (•) button you can
go through the loop of these seven types of information (see
section 6.4.1. Function of each button). And you can hide any of
those in case you do not need them while riding.
Setting MORE > Clock
Time can be adjusted or can be synchronised with your smart
phone.
Setting MORE > Cyclist weight
Input the cyclist’s weight for the proper calculation of your
calorie output. You can set the weight of 2 cyclists using the
same X Speed vehicle frequently.
Setting MORE > E-KEY
The two E-KEYs supplied with your bike are being paired with
the E-drive system by your Klever dealer upon purchase. You
have two options for the E-KEY functionality:
1. E-KEY must always be inserted
When you turn on the system the display will read “insert
E-KEY”. You have to insert the E-KEY to activate the system.
In case you start to ride without inserting the E-KEY, the
alarm will set off and the motor will be locked. Once you have
inserted the E-KEY and the system is being activated, you
can remove it and the system will continue to operate until
you turn off the system. After that the motor lock is being
activated. The next time when you turn on the system again,
the display will ask again for the insertion of your E-KEY.
2. Motor lock option YES or NO
The start-up procedure is the same: the display will ask to
insert the E-KEY. In case you remove the E-KEY while the
system is still on, the display will ask whether you want to lock
the motor or not:
• Once you select NO, you can continue to cycle. After you
have finished cycling, you turn off the system with the On/
Off button. The next time when you turn on the system, you
will not need the E-KEY to activate the system. However, in
case you have turned on the system, the system does not
ask to insert the E-KEY, yet you do insert the E-KEY, then you
turn back in the loop of the NO/YES-choice.
• Once you select YES, the system will be turned off instantly
and the alarm and the motor lock will be activated. In case
you start to ride your bike now, the alarm will set off and the
motor will be locked. In case you turn on the system with the
Power button, then the display will ask to insert the E-KEY
Display
Display
